Craig And Derricott - EDMP404 ISOLATOR SWITCH, SWITCHGEAR, ENCLOSED, 40 AMP, 4 POLE, 4KV, 15KW, 2XM12/M20, LIGHT GREY, IP66
EDMP404
Manufacturer: Craig And Derricott
ISOLATOR SWITCH, SWITCHGEAR, ENCLOSED, 40 AMP, 4 POLE, 4KV, 15KW, 2XM12/M20, LIGHT GREY, IP66
10 in stock
Order by 16:00 for same day UK despatch
Enclosed Isolator Switch, 40 Amp, 4 Pole
This moulded plastic enclosed isolator switch has a 40 Amp current rating, is offered in a 4 pole format and is part of the Craig and Derricott Mercia range. With an operational power of 6 kW at 230 Volt, and 15 kW at 400 Volts, and IP66 protection, this switch isolator is suitable for a wide range of industrial switching applications.
The spacious IP66 rated moulded plastic enclosure comes with 2 x M12/M20 knockouts, and four external mounting holes and the option to remove the internal switch from the built-in DIN rail for easy cabling and a quick installation. The small footprint – 150 x 100 x 87 mm, ensures this isolation switch doesn’t command too much space in your installation.
Durable, this switchgear features a red safety padlockable handle, with the facility to insert up to three padlocks in the OFF position preventing the isolator being switched to the ON position. This enclosed isolator switch is interlocked in the ON position which prevents the lid from being removed when padlocked in the OFF position. This impressive isolator switch has been independently tested and is compliant with IEC/BS EN 60947-3 standards.
What does an Isolator Switch do?
An enclosed isolator switch is a robust ON/OFF switch contained within a dedicated enclosure that is used to isolate an electrical circuit. This type of switch is used when it is necessary to turn off power to a particular circuit, such as during maintenance and repair. Isolator switches are also used as a safety measure against accidental electric shock. Isolator switches can be found in a wide range of applications, including industrial, commercial and home environments. An industrial isolator switch is usually located within or close to an installations control panel.
Enclosed Isolator Switch Features
- Current Rating 40 Amp
- Rated insulation voltage 690 V
- Rated impulse voltage 4 kV
- 4 Pole Format
- Operational power 6 kW (230V), 15 kW (400V)
- Short time withstand current 800 Amps (1 sec)
- K40 interior switch
- Enclosure size EA
- Enclosure material PC/ABS
- Enclosure colour – Light Grey RAL 7047
- IP66 protection rating
- Cable entries 2 x M12/M20 Knock-outs, top and bottom
- Terminal capacity – Flexible 6 mm2, Rigid 10 mm2
- Operating temperature range -5 to + 40 Deg C.
- Dimensions HxWxD – 150 x 100 x 87 mm
Datasheets and Manuals
Product Information
Manufacturer: | Craig And Derricott |
Pricing Unit: | Each |
Weight: | 0.556 kg (each) |
Tariff code: | 85365080 |
Generic code: | CRAG1 |
Product Details
ETIM Group: | Low-voltage industrial components |
ETIM Class: | Switch disconnector (low voltage) |
Colour control element: | Red |
Conditioned rated short-circuit current Iq: | 0kA |
Degree of protection (IP), front side: | IP66 |
Degree of protection (NEMA): | Other |
Depth: | 87mm |
Device construction: | Complete device in housing |
Height: | 150mm |
Housing colour: | Grey |
Interlockable: | Y |
Max. rated operation voltage Ue AC: | 690V |
Motor drive integrated: | N |
Motor drive optional: | N |
Number of auxiliary contacts as change-over contact: | 0 |
Number of auxiliary contacts as normally closed contact: | 0 |
Number of auxiliary contacts as normally open contact: | 0 |
Number of poles: | 4 |
Number of switches: | 1 |
Rated operating voltage: | 690,690V |
Rated operation power at AC-23, 400 V: | 15kW |
Rated operation power at AC-3, 400 V: | 15kW |
Rated permanent current at AC-21, 400 V: | 0A |
Rated permanent current at AC-23, 400 V: | 40A |
Rated permanent current Iu: | 40A |
Rated short-time withstand current lcw: | 0kA |
Suitable for distribution board installation: | N |
Suitable for floor mounting: | N |
Suitable for front mounting 4-hole: | Y |
Suitable for front mounting centre: | N |
Suitable for intermediate mounting: | Y |
Switching power at 400 V: | 15kW |
Type of control element: | Turn button |
Type of electrical connection of main circuit: | Screw connection |
Version as emergency stop installation: | N |
Version as main switch: | Y |
Version as maintenance-/service switch: | Y |
Version as reversing switch: | N |
Version as safety switch: | Y |
Voltage release optional: | N |
Width: | 100mm |
Width in number of modular spacings: | 0 |
With pre-assembled cabling: | N |
Dimensions (Unpackaged)
Quantity | Height | Width | Length | Weight |
---|---|---|---|---|
1 | 150 mm | 98 mm | 110 mm | 494 g |
All shipping options below are for United Kingdom. Delivery prices below are Exc VAT.
Web Promo Carriage | UK standard delivery, usually within 1 - 2 days (1 per day, minimum order £20.00) | £0.00 |
Standard 1-2 Days | UK standard delivery, usually within 1 - 2 days | £10.00 |
Next Day* | UPS Next Day service* | £10.00 |
Express* | UPS Express delivery by 12:00pm* | £25.00 |
Saturday** | UPS Saturday service** | £40.00 |
Collect | Collection is available from our site - please call if your order is urgent | £0.00 |
Greyed out shipping options indicate services not available, as the certain criteria has not been met. (i.e. it's after the cut off time or items in your basket are not in stock for Next Day, Express or Saturday delivery)
* Delivery services are subject to exception areas, click exceptions to view the affected areas or use the 'shipping estimator' tool to view delivery options.
International Delivery
We can provide international shipping to 240+ countries worldwide. Please select your country so we can provide you with delivery date and cost estimates.
International Priority – Terms DAP to Delivery Address
For our overseas customers, we offer a very competitive and fast delivery service; however, if you prefer to collect using your own courier, then we can also arrange that at no extra cost.
Our technical team can help find an alternative! Fill in the below to get started.