Pepperl + Fuchs - KFD2-STC4-EX1 SMART TRANSMITTER POWER SUPPLY, 1-CHANNEL ISOLATED BARRIER, 24VDC, 0/4-20MA OUTPUT

KFD2STC4EX1 / 283672

Manufacturer: Pepperl + Fuchs
SMART TRANSMITTER POWER SUPPLY, 1-CHANNEL ISOLATED BARRIER, 24VDC, 0/4-20MA OUTPUT

More Information...


47 in stock

Order by 16:00 for same day UK despatch

Price
£329.47
£395.36 (IncVAT)

Quantity:

Product add to cart ajax loader
One Free UK delivery per day for all online orders over £20.00

KFD2-STC4-Ex1


Features


  • 1-channel isolated barrier
  • 24 V DC supply (Power Rail)
  • Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources
  • Output 0/4 mA ... 20 mA
  • Terminals with test points
  • Up to SIL2 acc. to IEC 61508


Function


This isolated barrier is used for intrinsic safety applications. The device supplies 2-wire and 3-wire SMART transmitters in a hazardous area, and can also be used with 2-wire SMART current sources.Durable, this isolation barrier transfers the analog input signal to the safe area as an isolated current value.

Digital signals may be superimposed on the input signal in the hazardous or safe area and are transferred bi-directionally. If the HART communication resistance in the loop is too low, the internal resistance of 250  ? between terminals 8 and 9 can be used.

Test sockets for the connection of HART communicators are integrated into the terminals of the device.

Application

The device supports the following SMART protocols:
  • HART
  • BRAIN
  • Foxboro
Technical Data
General specifications
Signal typeAnalog input
Supply
ConnectionPower Rail or terminals 14+, 15-
Rated voltage20 ... 35 V DC
Ripplewithin the supply tolerance
Power loss1.5 W
Power consumption1.9 W
Input
Connectionterminals 1+, 2-, 3 or 5-, 6+
Input signal0/4 ... 20 mA
Voltage drop Ud= 2.4 V at 20 mA (terminals 5, 6)
Input resistance= 64  ? terminals 2-, 3 ; = 500  ? terminals 1+, 3 (250  ? load)
Available voltage= 16 V at 20 mA terminals 1+, 3
Output
Connectionterminals 7-, 8+, 9
Load0 ... 800  ?
Output signal0/4 ... 20 mA (overload > 25 mA)
Ripple= 50  µA rms
Transfer characteristics
Deviation
  • at 20 °C (68 °F), 0/4 ... 20 mA
  • = 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
Influence of ambient temperature0.25 µA/K
Frequency range
  • field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB)
  • control side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB)
Rise time20 µs
Start-up time200 µs
Electrical isolation
Output/power supplyfunctional insulation rated insulation voltage 50 V AC
Directive conformity
Electromagnetic compatibility 
Directive 2004/108/ECEN 61326-1:2006
Conformity
Electromagnetic compatibilityNE 21:2006
Protection degreeIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Protection degreeIP20
Massapprox. 200 g
Dimensions20 x 124 x 115 mm (0.8 x 4.9 x 4.5 in) , housing type B2
Data for application in connection with Ex-areas
EC-Type Examination CertificateBAS 99 ATEX 7060 , for additional certificates see www.pepperl-fuchs.com
Group, category, type of protectionEX II (1)GD [Ex ia] IIC [circuit(s) in zone 0/1/2]
InputEx ia IIC
Supply 
Maximum safe voltage Um250 V (Attention! The rated voltage can be lower.)
Equipmentterminals 1+, 3-
Voltage Uo25.4 V
Current Io86.8 mA
Power Po551 mW
Permissible connection values [EEx ia] 
Equipmentterminals 1+, 2 / 3-
Voltage Ui30 V
Current Ii115 mA
Voltage Uo25.4 V
Current Io115 mA
Power Po584 mW
Permissible connection values [EEx ia] 
Equipmentterminals 5-, 6+
Voltage Ui30 V
Current Ii115 mA
Voltage Uo8.7 V
Current Io0 mA
Output 
Maximum safe voltage Um250 V (Attention! The rated voltage can be lower.)
EC-Type Examination CertificateDMT 01 ATEX E 133
Group, category, type of protectionEX I (M1) [Ex ia] I
Statement of conformityTÜV 99 ATEX 1499 X , observe statement of conformity
Group, category, type of protection, temperature classEX II 3G Ex nA II T4 [device in zone 2]
Electrical isolation 
Input/Outputsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/power supplysafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity 
Directive 94/9/ECEN 60079-0:2006, EN 60079-11:2007, EN 61241-11:2006 , EN 60079-15:2005 , EN 50303:2000
International approvals
UL approval 
Control drawing116-0173 (cULus)
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperlfuchs.com.

Product Information

Alternative Part Number: 283672
Manufacturer: Pepperl + Fuchs
Pricing Unit: Each
Weight: 0.149 kg (each)
Tariff code: 85365019
Generic code: PFPA10

Product Details

Depth: 115mm
ETIM Class: NAMUR switching amplifier
ETIM Group: Sensors
Height: 124mm
Number of channels: 1
Rated supply voltage at DC: 20 - 35V
SIL according to IEC 61508: 2
Type of electric connection: Screw connection
Type of power supply: Active
Width: 20mm

Dimensions (Unpackaged)

Quantity Height Width Length Weight
1 114 mm 20 mm 120 mm 120 g

All shipping options below are for United Kingdom. Delivery prices below are Exc VAT.

Web Promo Carriage UK standard delivery, usually within 1 - 2 days (1 per day, minimum order £20.00) £0.00
Standard 1-2 Days UK standard delivery, usually within 1 - 2 days £10.00
Next Day* UPS Next Day service* £10.00
Express* UPS Express delivery by 12:00pm* £25.00
Saturday** UPS Saturday service** £40.00
Collect Collection is available from our site - please call if your order is urgent £0.00

Greyed out shipping options indicate services not available, as the certain criteria has not been met. (i.e. it's after the cut off time or items in your basket are not in stock for Next Day, Express or Saturday delivery)

* Delivery services are subject to exception areas, click exceptions to view the affected areas or use the 'shipping estimator' tool to view delivery options.

International Delivery

We can provide international shipping to 240+ countries worldwide. Please select your country so we can provide you with delivery date and cost estimates.

International Priority – Terms DAP to Delivery Address

For our overseas customers, we offer a very competitive and fast delivery service; however, if you prefer to collect using your own courier, then we can also arrange that at no extra cost.

Our technical team can help find an alternative! Fill in the below to get started.

Kempston Controls is electrical and electronic components distributor, providing fuses, sensors, control components, industrial automation equipment and more. If you would like to discuss any of the parts which you see on our online store, please contact our dedicated sales centre on +44 (0) 1933 411411.

What our Customers are saying


;